How to measure for your splashback - Cherry Glass
Order by 30th Nov to ensure delivery on or before 22nd Dec.
Orders after 30th Nov will arrive in the New Year.

How to measure for your splashback


Measuring for a splashback is straight forward. Just follow our simple guidelines below to ensure your splash back fits.

Use a spirit level to check the walls and surfaces are straight and level. 


Glass is always measured width first and in mm. 


Measure the width and height with a tape measure. We will take off a further 2mm to allow for the tolerance of the glass. The glass can vary in size by 2mm, so this will ensure it is not too big to fit a gap. 


If you need socket holes, measure the position of these from the bottom and one edge. You can also send us a sketch by uploading it via our website for a quote (for the glass and cut-outs).

Note: The distance required between any cut outs is always 24mm to retain the structural integrity of the glass. 
 

Most Splashback size options are already set on our website, however If you have a complex shape, such as a curve to suit a cooker hood, then you will need our Templating and Fitting Service which is priced on application?

Click here to contact us about our templating and service...


 Always double check your measurements. Once the glass is toughened it cannot be cut or changed.